Round Baler Mainero 5886: Greater reliability, performance and productivity
New collector spread wide with rotary feeder.
The extended collector offers 2,140 mm wide collection among guards (1,914 mm between outer tines) and is equipped with barbed diameter of 6 mm over its entire width (before only these spikes were placed only on both ends thereof) and
control wheels solid height (were pneumatic tires before) .With this the Rotoenfardadora 5886 improves collection efficiency especially in wide rows, scattered or disarmed by the wind, rows trodden by the tractor wheels, heavy swaths either high volumes forage and its high moisture content, rows of stubble, etc. Moreover, for being a solid, the risk is avoided punctures on wheels height control.
One of the largest and most important virtues of this collector is to achieve a proper adaptation to collect stubble rows of all kinds on the one hand and pastures of low volume and density of the other rows, without adjustments or regulations and without losing efficiency in rows of pastures or soiling of appropriate density and structure.
To achieve this ambitious goal, the floating windbreaks equipped with large diameter rigid barbed whose design allows to maintain adequate traction throughout the journey that makes the material to entry into the compaction chamber, already used in the 5885 model Rotoenfardadora remains POWER .
The working capacity of modern power units allows complete filling a roll of 800 kg in 40 seconds (20 kg / sec). But all power units that were designed to work in pastures can hardly maintain this feed rate in rows of stubble and some soiling, ie, in some of the few conditions where the density of line would not be limited to manifest its full capacity. This new collector not only keeps the rate of food, but can increase it up to 10-15% (22 to 23 kg / second) in virtually any stubble and high volume verdeo row since it has a new rotary feeder -instead of the Alternative whose “stars” trilobuladas helically arranged on a hexagonal shaft and bushings are spaced apart by spacers (no soldering required) and is simply attached by a pin tip. It offers, in addition to greater mechanical simplicity, reliability and reduced maintenance requirements, improved feed rate under extreme row either by its weight, due to their short stems, the presence of (two chains and three bearings were removed) “heaps”, high humidity, etc.
Rotoenfardadora In 5886 a new main control box (for nt 540 rpm) at which the necessary reduction gears for all control of rollers of the compacting chamber having a gear ratio 1 is produced was mounted: 1 and therefore, all provided with gears of equal size, significantly improving life. For the same purpose, all the chains of command of these were replaced, and the collector command set for reinforced chains.
New control rolo rubber lined.
To improve the ability to process round bales each time more compact and heavy, a new control rolo lined with rubber on the bottom of the camera was mounted. That is, now control both rollers (upper and lower) are lined with rubber which significantly improves traction on the same belts compaction chamber.
New automatic lubrication of all chains.
In each opening of the discharge gate all the chains of command of the machine (6) control both the rollers of the compacting chamber as the control of the collector and feeder are lubricated. Just before the three chains of command of the rollers is lubricated. On the other hand, the chain of command of the collector has automatic spring tensioner. All this aims to reduce maintenance downtime and achieve better performance of these critical parts.
New centralized lubrication bank.
In order to simplify the task and reduce maintenance time, all grease nipples, one focused on two central points for each laterally to also avoid forgetting ensure lubrication or omission of any of them.
New door position sensor.
To avoid accidental breakage, the sensor is re-positioned door positioned directly on the trigger locking thereof. Moreover, it is now in a position more easily accessible and has a protection that prevents the accumulation of dust on it.
New ejector ramp.
In order to ensure the removal of all rolls regardless of size, weight, moisture content, etc. without adjustments or regulations, a new type ejector system was mounted ramp but mechanically controlled by the discharge gate, whose condition pivotal works like a real stripper. In addition to increased reliability of operation, it offers fewer moving parts and therefore lower maintenance requirements. To avoid that slope conditions, the boom roll back into the machine, optional in a couple of extensions that keep you away from the path of the discharge gate at all times.
Binder four wire.
By its proven efficacy, binder single arm applies four threads simultaneously bringing the dead bound by approximately 50%, ie, instantaneously applied twice thread to a similar bundle time is reduced is maintained. This implies another increase in the operating capacity of 18 to 24% keeping intact the heart of the machine, ie the compaction chamber. The width of the thread cutting blade in order to improve their ability to cut and prevent any of them escape their share increased.
New binder network (optional).
For those wishing to further increase the operational capacity of the Rotoenfardadora 5886 by further reducing the dead time tying is optional in a new binder uniquely designed network that allows tying in 6-8 seconds depending on the amount of Applied network, one of the fastest in the world market, representing another 18-20% increase in the operating capacity of the machine on the increase -for provided by the binder 4 hilos- also keeping intact its compaction chamber . Moreover, the net wrapping bales to manipulate as many times without any risk of “disarm” and reduce clearance times compared to the same wire bundle, reducing labor costs when delivery or load on the mixer.
As outstanding characteristics may be mentioned the following:
High mechanical simplicity.
Coil placement time network: about 20 seconds.
Supports network coils of 1.63 and 1.70 m in width.
Average time tied: 6-8 seconds.
Storage for two coils.
Using coils of 1.70 m wide, the network covers the edges.
Increased storage capacity wire 12 coils 6 kg c / u.
For the same purpose, the storage capacity wire expanded coils 12 6 kg each, thus the working autonomy extends by 25% over the 5885 model Rotoenfardadora POWER contributing to reduce downtime and increase capacity actual operating.
New high flotation rolled 21.5L – 16.1 – PR10 (optional).
To increase comfort cushioning blows during transit through difficult roads, as well as improving traffic on uneven or trampled lots and reduce compaction and / or deformation of loose or soft soil, new rotoenfardadora 5886 can be placed, as optional equipment, shot 21.5L – 16.1 – PR10 – Hi-Flo.
As standard it is equipped with road tires 400/60 – 15.5.